GET A FREE CONSULT

ISO 17359 · ISO

Building a condition-monitoring program

ISO 17359 addresses the overall approach to condition monitoring and machine diagnostics. It is useful when a plant needs a coherent program rather than a collection of instruments and disconnected readings.

What it addresses

The public catalog describes general procedures for establishing a condition-monitoring program and references other relevant standards. It is broad program guidance. It does not give every asset a universal alarm limit or establish that a chosen technique can detect every possible failure.

Who should use it

Reliability engineers, PdM coordinators and maintenance leaders deciding what to monitor, why to monitor it, and how findings will reach the people who can act.

Apex application guidance · not normative requirements

Start with the decision a measurement will support

  1. Describe the equipment function, failure concern and operational consequence before selecting a sensor or inspection route.
  2. Ask what observable change would provide useful warning, whether it can be measured safely and consistently, and who will interpret the result.
  3. Agree how a finding becomes a reviewed maintenance decision. Keep the measurement context and the follow-up outcome together so the program can learn from misses and false alarms.

Limits and common misunderstandings

  • A healthy trend in one measurement is not proof that the whole machine is healthy.
  • Technique selection and safe measurement access depend on the asset and its operating conditions.
  • This orientation supplies no measurement interval, acceptance limit or authorization to operate equipment.

Practical question

Is ISO 17359 a vibration alarm chart?

No. Its public scope is the general condition-monitoring program. Select the applicable machine- and technique-specific references separately, and check their scope before using any criteria.

Official sources and review notes

Official title: Condition monitoring and diagnostics of machines — General guidelines.

ISO lists edition 3, published January 2018, as Published and confirmed in 2023 (stage 90.93). The public scope describes general procedures for setting up machine condition monitoring.

Catalog checked: . Editorial status: reviewed for public-source orientation; independent technical sign-off not performed.

The original Apex draft PDF is not distributed on this page. The publisher link above is the source for the official document; access and licensing terms are set by its publisher.

Apex orientation and commentary based on public publisher information, not a full-text analysis of licensed standards. This does not establish compliance, replace a purchased standard, or constitute legal, safety or engineering advice. Check applicable editions, jurisdictional adoption, contracts and employer requirements with competent people.

Turn what you have read into a useful next step.

Organize your equipment problem into a free preliminary engineering brief. No email required; you choose whether to share it for review.