GET A FREE CONSULT

Equipment & Maintenance References

Find context for your next maintenance decision.

Start with the equipment or symptom. Read the source date and applicability notes, then use the reference to frame a better investigation.

Find an equipment reference

Original sources. Practical Apex context.

6 reviewed orientations link to free DOE PDFs. No account or email is required. These documents were published in 2004–2012; they are background references, not current OEM procedures.

About dates, scope and historical material

6 references

Pumps · DOE tip sheet

Build a pump maintenance plan around condition

Use the DOE maintenance overview to connect routine pump care with condition trends and periodic performance checks.

Source published: September 2005 · PDF, 2 pages

Apex orientation reviewed 2026-11-18. Check current OEM instructions before applying.

Pumps · DOE tip sheet

Check whether the pump still matches the process

Review throttling, bypass flow and changed production demand before selecting a pump modification or a variable-speed drive.

Source published: October 2005 · PDF, 2 pages

Apex orientation reviewed 2026-11-18. Check current OEM instructions before applying.

Motors & Electrical · DOE tip sheet

Investigate the stresses behind repeated motor failures

Organize motor failure evidence around environment, loading, temperature, lubrication and repair history before another replacement.

Source published: November 2012 · PDF, 2 pages

Apex orientation reviewed 2026-11-18. Check current OEM instructions before applying.

Motors & Electrical · DOE tip sheet

Separate motor insulation stress from bearing-current problems

Use the DOE overview to frame questions about PWM drives, motor cables and bearing currents, then check the actual OEM guidance.

Source published: November 2012 · PDF, 2 pages

Apex orientation reviewed 2026-11-18. Check current OEM instructions before applying.

Compressors & Compressed Air · DOE tip sheet

Make air-leak repairs part of a repeatable program

Connect leak identification, repair tracking and verification with pressure stability and compressor operating behavior.

Source published: August 2004 (revised) · PDF, 2 pages

Apex orientation reviewed 2026-11-18. Check current OEM instructions before applying.

Compressors & Compressed Air · DOE tip sheet

Investigate pressure dips during intermittent air demand

Understand how storage and compressor controls interact before adding a receiver or increasing system pressure.

Source published: August 2004 · PDF, 2 pages

Apex orientation reviewed 2026-11-18. Check current OEM instructions before applying.

What has been reviewed?

We read the source PDF for its title, publication date and scope, checked the publisher link, and wrote original Apex context and applicability notes. This is an editorial source review, not independent technical sign-off or confirmation that an old document is current.

The source inventory contains 332 PDFs. The remaining 326 are held for review. Historical handbooks and catalogs will be clearly labeled before any are added; none are included in this first set. A missing topic means it has not yet been published here.

Use current instructions for the actual equipment, firmware and installation. Electrical testing, pressure-system changes and intrusive work require qualified personnel and applicable safe-work procedures. Publisher PDFs remain on their original sites; Apex does not mirror their tables or diagrams.

Found an error? Contact Apex with the page title and the detail to review.

Turn what you have read into a useful next step.

Organize your equipment problem into a free preliminary engineering brief. No email required; you choose whether to share it for review.