When this reference is useful
Pumping Systems Tip Sheet #6 explains how changed demand and oversized equipment can create a mismatch between a pump and the system. It describes screening indicators and options for further analysis.
Original Apex application notes
Frame the investigation
- Compare the original design duty with today's flow, head, fluid properties and operating schedule. Distinguish measured values from estimates.
- Record persistent throttling, bypass flow and seasonal changes as investigation clues. Review the pump curve and actual operating point with the supplier.
- Evaluate alternatives against process requirements, minimum-flow limits and the system curve before specifying a speed change, impeller change or replacement.
Check these limits before applying it
- The 2005 screening percentages are investigation prompts, not universal operating limits or proof that a pump is incorrectly sized.
- Variable speed is not automatically suitable. Static head, suction conditions, minimum flow and process constraints need equipment-specific assessment.
- The source's energy-price assumptions and worked savings are historical examples, not Apex results or a forecast for your plant.
Read the original source
Match Pumps to System Requirements, U.S. Department of Energy, October 2005.
Free publisher-hosted PDF, about 200 KB. No email required.
Source text and publisher link checked 2026-11-18. This review establishes the document's identity and scope, not current OEM approval or independent technical validation. The Apex notes above are separate from the publisher's guidance.
This orientation supports investigation planning. Use the current equipment instructions and an equipment-specific work procedure before testing, changing settings or modifying a system. Do not bypass protective functions.