When this reference is useful
Motor Systems Tip Sheet #15 introduces interactions between PWM drives, cable characteristics and motors. It addresses reflected voltage at motor terminals and possible current paths through bearings.
Original Apex application notes
Frame the investigation
- Record the drive and motor models, cable construction and length, existing filters, grounding arrangement and damage observations before proposing a remedy.
- Keep differential-mode reflected-wave and dv/dt insulation stress distinct from common-mode bearing-current mechanisms. A device selected for one mechanism does not necessarily control the other.
- Review mitigation with the drive and motor suppliers using their current installation guidance. Document the mechanism being addressed and how the proposed change will be verified.
Check these limits before applying it
- This is a November 2012 orientation. Its carrier-frequency, cable-length and voltage statements must not be treated as universal safe settings or damage thresholds.
- Drive topology, motor construction, cable installation and operating duty affect applicability. The tip sheet is not a parameter-setting or filter-selection procedure.
- Do not infer bearing current or causation from a shaft-voltage value alone. Live waveform measurements require qualified personnel, suitable instrumentation and an equipment-specific safe-work procedure.
Read the original source
Minimize Adverse Motor and Adjustable Speed Drive Interactions, U.S. Department of Energy, November 2012.
Free publisher-hosted PDF, about 585 KB. No email required.
Source text and publisher link checked 2026-11-18. This review establishes the document's identity and scope, not current OEM approval or independent technical validation. The Apex notes above are separate from the publisher's guidance.
This orientation supports investigation planning. Use the current equipment instructions and an equipment-specific work procedure before testing, changing settings or modifying a system. Do not bypass protective functions.